352930 FAG Tapered Roller Bearings Steel Cage for Trolley Wheel

• Customization: Available
• After-sales Service: Reply Customer Within 24h
• Warranty: Can Replace If The Problem Cause by Product
• Model NO.: 352930
• Od: 210mm
• Width: 80mm
• Cage: Brass , Steel
• Weight: 9.32kg
• Seals Type: Open
• Transport Package: Standard
• Specification: 150*210*80mm
• Trademark: SKF FAG INA LYC
• Origin: Germany, China

Product Description

Product Description

Single row tapered roller bearings are mainly used for radial loads and  the condition of axial load n, Some tapered roller bearings with large tapered angles(22°~31°)
it is subject to axial load, radial combined load,generally used for pure axial loading. During installation and use process, it can be adjusted adjustable radial and axial clearance,Pre-interference mounting can also be used to increase bearing rigidity.The clearance of tapered roller bearing directly affects the performance of the bearing.When the clearance is too small, the temperature rise is higher.When the clearance is too large, the vibration increases, the rotation accuracy is difficult to guarantee .Single row tapered roller bearings are mostly used in automobile rear axle hub , spindle of large machine tool,high power reducer,conveyor roller, etc.

Double Row tapered roller bearings are mainly used to bear the action of radial and axial combined loads.Axial displacement in both directions of the shaft (or housing) can be limited,therefore, it can be used as bi-directional axial positioning bearing .TDO type of bearing's performance is similar to that of two single-row tapered roller bearings mounted back to back,but TDO's parts quantity is small, Installation and disassembly are also easier, and has good rigidity,Therefore, it is mostly used for the occasion of bearing alternating load.Such as reducer, coiler, etc. 

Four-row tapered roller bearings are also widely used roller bearings,the bearing capacity of this structure is very large.It can bear both radial and axial combined loads which are mainly radial loads.The radial bearing capacity is 2.5~3.5 times of single row bearings,can bear a large radial load as well as axial load.Due to structural limitations, compared to four-row cylindrical roller bearings,

 

Product Parameters

   

Dimension							Rated load		Model		Weight	Max.limited speed
mm							kN		Current	Original	kg	r/min
d	D	T	B	C	rmin	r1min	Cr	Cor				Grease	Oil
150	270	77	73	60	4	3	718	1200	32230	7530E	18.2	1200	1700
	320	114	108	90	5	4	1110	1580	32330	7630	37.1	950	1400
160	240	51	51	38	3	2.5	420	735	32032	2007132E	7.7	1200	1700
	340	75	68	58	5	4	765	960	30332	7332E	28.4	1000	1500
	340	121	114	95	5	4	1210	1770	32332	7632	48.3	950	1400
170	230	32	30	23	3	3	200	400	70DB170	-	3	1200	1700
	310	91	86	71	5	4	835	1320	32234	7534E	27.6	1000	1500
	360	80	72	62	5	4	950	1400	30334	7334E	35	950	1400
	360	127	120	100	5	4	975	1764	32334	7634	58.3	1000	1300
180	280	64	60	52	3	2.5	540	890	32036X2	2007136	13	1100	1600
	280	64	64	48	3	2.5	569	950	32036	2007136E	14	1100	1600
	320	57	52	43	5	4	610	912	30236	7236E	17.8	1000	1500
	320	91	86	71	5	4	998	1727	32236	7536E	29.8	950	1400
190	260	45	42	36	2.5	2	292	580	32938X2	2007938	6.52	1000	1400
	290	51	46	40	3	2.5	435	365	-	7138	10.5	1000	1500
	290	64	60	52	3	2.5	502	932	32038X2	2007138	14.2	950	1300
	290	64	64	48	3	2.5	520	950	32038	2007138E	15.6	950	1300
	340	97	92	75	5	4	1117	1919	32238	7538E	36.1	900	1300
200	280	51	48	41	3	2.5	345	710	32940X2	2007940	8.86	950	1300
	280	51	51	39	3	2.5	460	950	32940	2007940E	9.5	950	1300
	310	70	66	56	3	2.5	575	1120	32040X2	2007140	17.9	900	1200
	310	70	70	53	3	2.5	650	1300	32040	2007140E	18.9	900	1200
	360	64	58	48	5	4	765	1140	30240	7240E	25.4	900	1300
	360	104	98	82	5	4	1090	1750	32240	7540E	43.2	900	1300
205	485	118	100	75	4	4	1400	2020	30641	7841E	95	850	1200
210	420	90	81	67	6	5	1280	1910	-	7342X2	56	850	1200
220	300	51	48	41	3	2.5	425	855	32944X2	2007944	10.2	900	1200
	340	76	72	62	4	3	702	1330	32044X2	2007144	22.2	800	1000
	340	76	76	57	4	3	750	1350	32044	2007144E	24.4	800	1000
	400	72	65	54	4	3	810	1150	30244	7244E	35.4	850	1200
	400	114	108	90	4	3	1320	2210	32244	7544E	48.1	800	1100
240	320	51	48	41	3	2.5	390	860	32948X2	2007948	10.8	800	1000
	360	76	72	62	4	3	710	1420	32048X2	2007148	23.8	700	900
	360	76	76	57	4	3	850	1560	32048	2007148E	20.4	700	900
	440	127	120	100	4	4	1630	2730	32248	7548	81.3	750	1000
260	360	63.5	60	52	3	2.5	525	1150	32952X2	2007952	19.2	700	900
	360	63.5	63.5	48	3	2.5	550	1300	32952	2007952E	20	700	900
	400	87	82	71	5	4	902	1810	32052X2	2007152	36.9	670	850
	400	87	87	65	5	4	1010	1850	32052	2007152E	37	670	850
	540	114	102	85	6	6	2014	2898	30352X2	7352	111	670	900
270	420	87	87	65	5	4	1150	2060	32054	2007154	45	600	750
280	350	36	33	26	2	2	279	469	30656	1007856	6.33	870	1100
	380	63.5	63.5	48	3	2.5	635	1300	32956	2007956E	19.8	800	1100
	420	87	82	71	5	4	622	1940	32056X2	2007156	39.6	600	750
	420	87	87	65	5	4	1170	2230	32056	2007156E	40.4	600	750
300	420	76	76	57	4	3	998	2128	32960	2007960E	28.7	700	950
	440	73	70	55	4	3	959	2062	30660	7860	30.7	570	600
	460	100	95	82	5	4	1050	2190	32060X2	2007160	55.9	560	700
	500	95	90	70	4	4	1225	2207	31160X2	1007760	67.7	530	670
320	440	76	72	62	4	3	1040	2320	32964X2	2007964	44.7	560	700
	440	76	76	57	4	3	962	2040	32964	2007964E	33	560	700
	480	100	95	82	5	4	1050	2190	32064X2	2007164	59	530	670
	480	100	100	74	5	4	1649	3192	32064	2007164E	60	530	670
	580	110	105	80	6	6	2100	3100	-	7264	114	480	600
340	460	76	72	62	4	3	611	1428	32968X2	2007968	34.3	530	670
	520	86	82	64	4	4	807	1540	32068X2	7168	57	500	630
	520	112	106	92	6	6	1660	3370	32068	-	86.5	500	630
	580	106	102	87	6	5	1840	2970	-	7768	109	480	600
360	480	76	72	62	4	3	634	1526	32972X2	2007972	35.9	500	630
	540	86	82	64	4	4	919	1848	31072X2	7172	60.5	480	600
	650	170	155	140	5	6	3580	6000	32272X2	-	175	380	480
380	520	66.5	65	46.5	3	3	529	1138	31976X2	1007976	37.5	480	600

Factory Photos